Kman's tank

KMan

Reefing newb
So when i wanted to start a saltwater tank, first things first is that i already had a tank.... but i had nothing to put it on.... I searched a lot of places for a stand but they were expensive as all get out... so i built one, with the help of my father in law who is a master carpenter and journey level contractor ofcourse :) plus he gets great deals on building materials.. Here is the construction phase, i do have a finished picture but it was on my phone that is now in the pacific ocean.. So when i get home i'll take a picture of the finished stand.
 

Attachments

  • 1.webp
    1.webp
    23.2 KB · Views: 392
  • 2.webp
    2.webp
    15.4 KB · Views: 401
  • 3.webp
    3.webp
    17.1 KB · Views: 405
  • 4.webp
    4.webp
    22.1 KB · Views: 368
  • 5.webp
    5.webp
    29.4 KB · Views: 372
  • 8.webp
    8.webp
    16.2 KB · Views: 370
  • 7.webp
    7.webp
    21.1 KB · Views: 407
  • 6.webp
    6.webp
    29.7 KB · Views: 408
this is my first tank i've done other then the freshwater with a beta lol. i went over to a friends house and his tank is absolutely beautiful so i wanted to do one. :)
 
Here is the final stand pictures with the tank on it.. the tank i'll be using is a 55ga long TruVu Acrylic tank. It was setup for an over the top set up, but i'm going to plumb it properly and do a overflow box inside on the back left corner inside the tank and just drill in bulkheads and such.
 

Attachments

  • setup1.webp
    setup1.webp
    56.1 KB · Views: 410
  • setup2.webp
    setup2.webp
    23.9 KB · Views: 410
  • setup3.webp
    setup3.webp
    16.5 KB · Views: 392
  • setup4.webp
    setup4.webp
    24.2 KB · Views: 360
Looks good!

You might consider trying to find a glass tank, acrylic scratches so easily that it can quickly become ruined in a saltwater tank.
 
Thanks everyone very much! The tiles are called a black sand granite, it's very beautiful indeed. My issue i'm going to run into is if i should do PVC for the plumbing or a flex tube, if i did PVC to limit the amount of bends in the piping i would have to push the tank all the way to the back.. thoughts?
 
Looks good!

You might consider trying to find a glass tank, acrylic scratches so easily that it can quickly become ruined in a saltwater tank.


Yes i've found that it does scratch very easy.. But before i put sand or anything in it, i'm going to resurface the acrylic to make it look like new. I'll probably get glass and i'll probably just build one.
 
I think you will be much better off getting the glass now. Its a major pain to move a tank and even the sand will scrape the acrylic
 
I will probably upgrade to glass eventually, they are not hard to build just very time consuming.. I'm waiting to do glass because this is a tank i've got for free, then once i decide on doing a bigger tank it will be glass.
 
So i've added the plumbing, although nothing is sealed to the tank yet or i haven't cleaned the excess off the pipes, this is just a mockup of what it will look like once the final touches are on it... i wanna test it and make sure it's all gravy before i have a what the french toast moment.. -
 

Attachments

  • 016.webp
    016.webp
    21 KB · Views: 357
  • 017.webp
    017.webp
    17 KB · Views: 362
  • 018.webp
    018.webp
    28 KB · Views: 353
  • 019.webp
    019.webp
    15 KB · Views: 373
Last edited:
So today, i finished up all of the mock plumbing and i'll be making some changes in the back area and I have some concerns with the return i havn't figured out yet.. 1 being that the Pump has an 1/2" out barb, and my tank is set up for 3/4", I can figure something out eventually but i'm afraid of losing a bunch of pressure due to friction. Anywhere I've painted the back of my tank a flat black and now i'm just waiting on it to cure and i'll put the plumbing back on and get the tank plumbed and ready to go! Oh yeah and my refugium came in today :) :^:
 

Attachments

  • tankpaint.webp
    tankpaint.webp
    40.9 KB · Views: 362
  • plumbing.webp
    plumbing.webp
    25.6 KB · Views: 386
  • refuge.webp
    refuge.webp
    18.2 KB · Views: 361
So i've added more stuff.. my refugium came in, and then i've also sealed the inside of the stand, lights came in and they are Coralife T5's with Lunar. Only thing i'm waiting on is the reefkeeper controller unit, then i'll be ready for some rock/sand and start cycling. I've adjusted the return as when i had the tank sitting on the back side of the stand i just didn't like the look of it... so i extended the back of the return so my return line wouldn't kink.
 

Attachments

  • refuge2.webp
    refuge2.webp
    35.9 KB · Views: 355
  • refuge.webp
    refuge.webp
    38.2 KB · Views: 319
  • overflow.webp
    overflow.webp
    13.8 KB · Views: 336
  • lights.webp
    lights.webp
    31.3 KB · Views: 331
  • herbie.webp
    herbie.webp
    13.7 KB · Views: 336
  • return.webp
    return.webp
    14.3 KB · Views: 336
  • returnextended.webp
    returnextended.webp
    16 KB · Views: 314
how many bulbs does the coralife t5 light have? It might not be enough to keep corals.

2 x 10,000k 65W
2 x Actinic 65w
4 x Lunar LED

*i think* my tank is not that deep i think my tank dimensions are.. well i'll measure when i get home in the morning..


these were used on my brother tank and he had the same size and worked just fine for him.. he upgraded to some $1500 light system
 
I hope so, my next step is to prep the acrylic and sand and polish. It can be a handful but a respirator, Hand sander, buffing wheel an about 2 hours and it will look like new :) I'm going to build a glass aquarium for a friend as a quarantine tank so it will e good practice for me. Im looking at some dry live rock today from a dive buddy of mine who gets rock. Im at that 90% mark and I'm ready to fill this sucker already
 
Back
Top