HeavyHittah
LivingReefs is like home
And I need some advice. Firstly this is for a 10g with no sump. As I understand with the double switch model one sensor is the main switch(lower sensor) and the other is the failsafe. I feel running it this way on my ten gallon the water level ends up being way too low because my water level will need to go low enough to make the bottom sensor drop. Right now my water level is at the black rim. The drop would be around 2 inches below the rim. So what I did was install both sensors at the same level using the top holes. Is this really a big concern? I hope you guys understand what I'm saying, lol