zdes
Reefing newb
So after about a month of research and getting in trouble with the fiance on a bi-daily basis, I finally got together my 10g nano reef.
Equipment:
-10g glass aquarium
-2 x 20 watt 50/50 coralife mini CFL's (white facing down, blue up, inside and out spraypainted gloss white)
-12" LED bubble strip (with no bubbles, just suction cupped to the front bottom of the plexiglass on hood)
-AC70 Fuge w/ Hydor 50w heater inside
-Koralia 240 Powerhead
-10 lbs annoying petco black sand
-13 lbs live rock (3 lbs of it seeded in lfs tanks, the other 10 is cured fiji)
Fauna (to be purchased in about 3 weeks):
-Chaeto for fuge (adding clip-on screw-in CFL to back of AC70)
-Cleanup crew (recommendations? i love the look of emerald crabs but don't know what their compatibility is like)
Fauna (to be purchased in about 4-5 weeks):
-Coral (recommendations? i'm going for color so I'm thinking a variety of mushrooms and a couple frags of xenia if I can find some around here at the lfs)
Fauna (to be purchased in about 6-7 weeks):
-2 x Occelaris Clownfish (should I even worry about getting a mated pair? I'm thinking about getting just 2 small immature males and let them mature into female and mature male)
I'm kinda not looking for anemones because I'd like to get some experience with cheaper SW Fish and Corals (plus the anemone police are MEAN!). Hoping the clowns end up hosting in xenia or shrooms. Zooanthids are pretty cool looking but I don't know if I have enough light for them.
I've had a couple problems. The reason I put annoying petco black sand on there is because, despite stirring and rinsing, it forms nuissance air/sand bubble/ball things and they get sucked into my AC, which eventually stopped it. I rinsed out the impeller fixture, put it all back together, and it worked. I had to mod the tube so that it wouldn't happen again, so I cut a small rectangle of AC sponge to fit between the U-tube and the intake tube, then squeezed the two tubes together (took some work but finally got it and the sponge doesn't move at all which is good because it almost got sucked in with my other prototypes).
Any feedback on anything about the tank would be appreciated. I'm new at the game but I've done a lot of research on the nano, threw out some of the stuff, then went with my gut.
Equipment:
-10g glass aquarium
-2 x 20 watt 50/50 coralife mini CFL's (white facing down, blue up, inside and out spraypainted gloss white)
-12" LED bubble strip (with no bubbles, just suction cupped to the front bottom of the plexiglass on hood)
-AC70 Fuge w/ Hydor 50w heater inside
-Koralia 240 Powerhead
-10 lbs annoying petco black sand
-13 lbs live rock (3 lbs of it seeded in lfs tanks, the other 10 is cured fiji)
Fauna (to be purchased in about 3 weeks):
-Chaeto for fuge (adding clip-on screw-in CFL to back of AC70)
-Cleanup crew (recommendations? i love the look of emerald crabs but don't know what their compatibility is like)
Fauna (to be purchased in about 4-5 weeks):
-Coral (recommendations? i'm going for color so I'm thinking a variety of mushrooms and a couple frags of xenia if I can find some around here at the lfs)
Fauna (to be purchased in about 6-7 weeks):
-2 x Occelaris Clownfish (should I even worry about getting a mated pair? I'm thinking about getting just 2 small immature males and let them mature into female and mature male)
I'm kinda not looking for anemones because I'd like to get some experience with cheaper SW Fish and Corals (plus the anemone police are MEAN!). Hoping the clowns end up hosting in xenia or shrooms. Zooanthids are pretty cool looking but I don't know if I have enough light for them.
I've had a couple problems. The reason I put annoying petco black sand on there is because, despite stirring and rinsing, it forms nuissance air/sand bubble/ball things and they get sucked into my AC, which eventually stopped it. I rinsed out the impeller fixture, put it all back together, and it worked. I had to mod the tube so that it wouldn't happen again, so I cut a small rectangle of AC sponge to fit between the U-tube and the intake tube, then squeezed the two tubes together (took some work but finally got it and the sponge doesn't move at all which is good because it almost got sucked in with my other prototypes).
Any feedback on anything about the tank would be appreciated. I'm new at the game but I've done a lot of research on the nano, threw out some of the stuff, then went with my gut.