madlynb
madtaz
Oh mighty and informative ones. I am in need of a new ballast. Here are the specs:
H/D Ballast; AC120V 60Hz
Line current: 2.35 amps (MAX) @120V
Power factor: Min 90%
Thermally Protected
Minimum Starting Temp: 0 degrees C
Maximum Mounting Distance: 33ft
Type 1 Outdoor
Max Case Temp (tc): 90 degrees C
Max Output Voltage: 920Vpk
The fixture was purchased thru AquaTraders, Metal Halide 1134W. It is an external 250W Electronic HQI Metal Halide Ballasts with On/Off Switch.
I have crossed checked bulbs and ballasts and this one is definitely out. Your advice of where to buy one is greatly appreciated.:bowdown::mrgreen::frustrat:
H/D Ballast; AC120V 60Hz
Line current: 2.35 amps (MAX) @120V
Power factor: Min 90%
Thermally Protected
Minimum Starting Temp: 0 degrees C
Maximum Mounting Distance: 33ft
Type 1 Outdoor
Max Case Temp (tc): 90 degrees C
Max Output Voltage: 920Vpk
The fixture was purchased thru AquaTraders, Metal Halide 1134W. It is an external 250W Electronic HQI Metal Halide Ballasts with On/Off Switch.
I have crossed checked bulbs and ballasts and this one is definitely out. Your advice of where to buy one is greatly appreciated.:bowdown::mrgreen::frustrat: